Installing the torque rod

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Stabilizer Brace

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install

the torque rod.
the screws for the brackets at the suspension turrets. Tighten to 50 Nm .
the screw and nut for the torque rod mounting in the torque control arm on the engine. Tighten to 80 Nm .

Tighten the torque rod to the brackets to 80 Nm .