Replacing the inlet valve / overfill protection: Notes
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
When replacing the intake valve / overfill protection the tank must be removed from the car. See Replacing the gas tank . The tank must be placed upright so that the float is not damaged.
CAUTION:
When replacing components on the tank, the gas pipes and the tank must be drained. See Draining the gas pipe and Draining the gas tank .
The battery negative terminal must be disconnected during all work carried out on gas installations. See Battery, disconnecting .
Do not damage the seals.