Removing sub-frame

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Sub-Frame Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Position a lifting table under the sub-frame
Remove the screws holding the sub-frame brackets to the bodywork on both sides
Remove the four screws from the sub-frame
Carefully lower the sub-frame.
NOTE:
Ensure that the steering gear screws are released from the sub-frame.

Fig 2: Hanging Steering Gear From Special Tool 999 5045 (Hook)

Courtesy of VOLVO CARS OF NORTH AMERICA.

Hang the steering gear from a hook 9995045 so that the lower steering shaft does not come apart.

On right-hand drive cars the hook is installed on the right-hand side.