Installing the three-way catalytic converter (TWC)

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying SIPS Member

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install

both ends of the three-way catalytic converter (TWC). Install the nuts loosely.
the catalytic converter member. Tighten to 25 Nm.
the brake pipe on the catalytic converter member.