Replacing the fan unit

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Cooling Fan, Cable, Connector And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Place the engine cooling fan (FC) on a flat surface with the fan pulley downwards.

Remove

the cable and connector from the holder on the fan shroud.
the screws for the control module and the blower fan motor.

Lift off the fan shroud.

Install a new fan unit in reverse order.