Installing turn signal lamp stalk and SRS contact reel
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- turn signal lamp stalk
- connector holder
- connector
- cable harness
- SRS contact reel. Tighten to 2.5 Nm
.
Connect connector. Ensure that the catches engage properly, and that the rubber cap for the contact reel connector is in place. Secure cable with the two clips.