Filling with oil
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Study the fluid product information sheet before starting work.
Fill the servo reservoir with oil. Bleed the system
- Repeatedly turn the steering wheel to full lock. Top up the oil if necessary
- Lower the car
- Apply the parking brake. Start the engine
- A: Turn the steering wheel slowly to the right. Hold on full lock for 2 seconds
- B: Turn the steering wheel slowly to the left. Hold on full lock for 2 seconds
- Repeat steps A
and B
20 times.NOTE:
Move the car after the operation has been carried out 10 times to avoid damage to the tires.