Installing the starter motor

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Starter Motor Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the cranking tool

Install:

the starter motor. Tighten the screws. Tighten to 40 Nm
the positive cables and the connector
the nut for the positive cables. Tighten to 25 Nm
the screw for the bracket. Tighten to 25 Nm . Use a ratchet wrench.