Installing the gear selector cable on the transmission and lever

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Gearbox And Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the ball joint for the gear selector cable on the lever
the gear selector cable in the bracket
the connector for the transmission. Press the connector into place properly.
CAUTION: It is important that the connector is pushed into place properly. If it is not correctly connected the gear shift function may stop.
the connector for the ABS unit.