Installing the front cross member

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Cross Member

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the screws for the exhaust pipe mounting. Tighten to 10 Nm
the brake pipe in its holders
the screws for the cross member. Tighten to 25 Nm .

Secure the heat deflector using rivets (early version).