Installing the engine pad on the engine mounting

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Engine Pad On Engine Mounting

Courtesy of VOLVO CARS OF NORTH AMERICA.

Take out the nut, a short extension bar and a socket.

Insert the nut into the socket so that it remains in place
Insert the extension bar up to the collision protection system using your left hand
Move up the engine pad to the engine mounting. Place the nut on the engine pad. Tighten the nut from above.