Installing the drive shaft and the viscous coupling
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Right-hand side:
Carefully align the viscous coupling in the transmission. Ensure that the sealing ring is not damaged.
Install:
- the drive shaft to the viscous coupling. Press the drive shaft so that the locking in the viscous coupling secures the drive shaft
- the bearing cap. Tighten to 25 Nm .