Installing engine compartment components

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Splash Guard Plate Screw

GLL109646

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the screw for the splash guard. Tighten to 25 Nm
the engine pad. Tighten to 50 Nm
the turbo pipe to the turbocharger (TC). Tighten the clamp
the lower screw for the oil pipe. Tighten to 25 Nm
the upper screw for the oil pipe
the connector
the tie strap around the electrical wiring.

Install the integrated relay/fusebox. See Install the integrated relay/fusebox .