Installing and tightening the screws for the transmission
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install all 6 screws for the transmission and engine.
At the same time, check that the whole of the transmission is in contact with the engine.
Then tighten the transmission/engine screws crosswise. Tighten to 50 Nm .
Remove the fixture from the transmission.
Install the 2 screws on the bracket at the cover for the differential housing.
Tighten the screws. Tighten to 50 Nm .