LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Axle Shafts - Removal & Installation (Coupe)) >> Driveline/Axles >> Drive Shaft, Left, Installing >> Transmission, installing >> Adjusting the position of the transmission and engine

Adjusting the position of the transmission and engine

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transmission On Mobile Jack
GLL109394Courtesy of VOLVO CARS OF NORTH AMERICA.

Adjust height and angle with the mobile jack and the transmission fixture.

Locate the transmission on the engine.

Ensure that the transmission goes straight in relation to the engine and that the torque converter is in the correct location.

NOTE: If necessary: Turn the engine so that the stator shaft is correctly aligned in the torque converter.