Installing the Drive Shaft In the Transmission

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bearing Cap And Drive Shaft Support Bearing

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the drive shaft mating surface. Use wheel bearing grease P/N 116 1241-3 (80 g).

Install the drive shaft on the transmission and the mounting for the pilot bearing with the bearing cap and the 2 M8 screws. Tighten.

Install the drive shaft to the wheel hub. See Drive Shaft Left, Replacing .

Fig 1: Bearing Cap And Drive Shaft Support Bearing

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the drive shaft mating surface. Use wheel bearing grease P/N 116 1241-3 (80 g).

Install the drive shaft on the transmission and the mounting for the pilot bearing with the bearing cap and the 2 M8 screws. Tighten.

Install the drive shaft to the wheel hub. See Drive Shaft Left, Replacing .