Wheel Spindle, Removing From Control Arm

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Prying Control Arm Down Using Lever 999 7076

Courtesy of VOLVO CARS OF NORTH AMERICA.

Pry the control arm with a crowbar. At the same time, lift the wheel spindle and spring strut from the control arm.

NOTE: Install protective socket 9995562 on the wheel spindle ball joint. Do not damage the rubber bellow for the ball joint.