LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> C70 2.3 53, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Half Shafts, Hubs, Wheel Spindles - Specifications, Removal & Installation (Coupe)) >> Driveline/Axles >> Drive Shaft, Front Left, Replacing >> Removal >> Removing the Drive Shaft From the Wheel Hub

Removing the Drive Shaft From the Wheel Hub

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Wheel Knuckle Moved To Side Using 999 7076, And Protective Sleeve 999 5562 Installed
GLL126307Courtesy of VOLVO CARS OF NORTH AMERICA.

Unhook the control arm from the ball joint pinion.

Pull the control arm down. Use lever 9997076 to move the wheel spindle to the side. At the same time, install protective sleeve 9995562 on the ball joint pinion. Hold the sleeve in place using the nut for the ball joint.

Remove the drive shaft from the hub.

scientia non olet · About LEMON Manuals