Check/Adjust Throttle Pulley And Cable
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Pulley should move easily without sticking.
Lubricate with petroleum jelly if needed.
Cable should be taut in idling position but must not affect pulley position. Pulley should seat against idling stop. Adjust cable as required.
Press accelerator pedal (AP) to floor and check that pulley seats against full-load stop.