Remove the Drive Shaft

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Right-Hand Drive Shaft To Gearbox

Courtesy of VOLVO CARS OF NORTH AMERICA.

Take hold of the inner constant velocity joint. Pull the drive shaft straight out of the transmission.

NOTE: Do not damage the seal.

NOTE: Do not under any circumstances pull the drive shaft in such a way that could cause the joints to separate. The joints do not have axial pinions.