Remove the Control Arms And the Tie Rod From Both Sides
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- the link for the anti-roll bar up at the spring strut. Counterhold using Torx 30. The rubber boot must not be twisted
- the tie rod from the wheel spindle. Use puller 9995259
- the screw for the drive shaft.