Removing the Starter Motor Torx Screw

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Starter Motor Torx Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Loosely reinstall the screw through the starter motor and the cylinder block. This is to hold the starter motor in position.

Remove the remaining screws between the transmission and the engine.