Installing Lifting Tools

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Lifting Hook 9995460

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

fender edge support 9995033 on the fender edges
lifting beam 9995006 on the support. Position the beam directly above lifting hook 9995638
lifting hook 9995460 . Tighten the hook approximately 5-10 mm so that the load on the engine pads is reduced slightly.

Note the distance between the lifting beam and the valve cover.