Install the New Boot/Boots On the Drive Shaft

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fastening Drive Shaft In Vise

Courtesy of VOLVO CARS OF NORTH AMERICA.

Secure the drive shaft in a vise.

Install the constant velocity joint on the drive shaft

Ensure that inner ring is straight in the constant velocity joint.

Tap on the constant velocity joint. Use a rubber mallet.

Check that the snap ring is seated in its groove.