Removing the Upper Torque Rod
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- the nuts for the cover panels over the shock absorbers
- the screw and nut at the torque control arm
- the screws for the mounting for the cross member.
NOTE:
Remove the upper nut at the exhaust flange. Remove the other two from underneath later on.