Installing the Torque Rod Mounting

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Torque Rod Mounting On Transmission Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the torque rod mounting on the transmission using new screws. Use bevel protractor 9512050 . Tighten to 35 Nm + 40°
the screws for the oil pipe brackets. Tighten to 25 Nm .

Check the oil level if necessary. Only use Volvo original transmission fluid (P/N 1161423-7).