Installing the Rear Engine Mounting On the Transmission
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install the mounting on the transmission (3 screws). Tighten the two rear screws. Tighten to 50 Nm . Remove the front screw again.
Install the engine pad splash guard using the screw for the mounting.
Press up the cover against the mounting. Tighten the screw. Tighten to 50 Nm .