Aligning the Steering Gear And the Collision Protection System In the Sub-Frame (Right-Hand Drive Cars Only)
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Raise the sub-frame so that it is 100 mm from the bodywork.
Locate the steering gear and the collision protection system in the sub-frame.
Install the left bearing and cap for the anti-roll bar. Tighten both the bearing caps. Tighten to 50 Nm .