Left-Hand Wheel Housing

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Bracket For Brake Pipe/ABS Cable

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

the front wheels.
ABS sensor from the wheel spindle (left-hand side) and tie up the ABS sensor on the spring strut.

NOTE: Do not disconnect the connector

Remove:

the brackets to the brake pipes and ABS cables (both sides). Unhook the brackets and let them hang freely.