Splash Guards, Wheels

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Cover And Cover Under Engine

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the front cover.
the cover under the engine.
the wheels.
Ensure that the brake discs and wheel rim mating surfaces are clean. Lubricate the centering lug on the hub for the rim. Use rust inhibitor P/N 1161405-4. Tighten the screws lightly. Then tighten crosswise with 110 Nm . When tightening with a nut runner use a 1158147 torque socket.