Removing the Mounting Screws From the Gearbox/Starter Motor
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fold the connectors, cable harness and cable conduit out of the way of the engine/gearbox.
Remove:
- the 3 screws for the gearbox/engine
- the 2 screws for the starter motor One screw is located under the starter motor
- the ignition setting sender. Remove it from the mounting.