Removing the Right Drive Shaft

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Drive Shaft Detached With Jimmy Bar

Courtesy of VOLVO CARS OF NORTH AMERICA.

Angle the wheel hub out. Remove the drive shaft from the hub. Use a tensioner band to pull the stub axle - wheel hub backwards.

Remove the drive shaft from the gearbox. Use Jimmy bar 9995462 B (modified according to the Workshop Guide Bulletin).

Install sealing plug 9997063 .