Removing the Propeller Shaft

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Removal Of Propeller Shaft Using Counterhold

Courtesy of VOLVO CARS OF NORTH AMERICA.

Mark the propeller shaft CV joint in relation to the bevel gear flange.

Remove:

the 2 screws for the center bearing mounting
the propeller shaft screws. Use counterhold 9997057 . Press the propeller shaft joints together. Move the propeller shaft to one side and tie it up.