Bevel Gear/Chain Housing, Replacing: Removal: Preparations

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sucking Up Oil Through Dip Stick Pipe Using An Oil Suction Device

Courtesy of VOLVO CARS OF NORTH AMERICA.

Drain the gearbox fluid.

Use an oil suction device to drain approximately 4 liters of gearbox fluid.

Remove the sub-frame. See Sub-Frame Front, Replacing .