Installing the Bracket

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Chain Housing Bracket Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the bracket on the cylinder block and chain housing using 6x M10 screws.

First tighten the screws for the bracket/cylinder block so that the bracket can moves slightly.

Then tighten the two screws to the bracket - chain housing alternately lightly.

Then tighten all the screws.

Install the screws for the fuel line clamp. Tighten.