Assembling the Bevel Gear/Chain Housing
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Lubricate the seal using gearbox fluid, P/N 116 1745-3 (1 liter container) when replacing the chain housing.
Do not damage the sealing ring when installing the chain housing on the bevel gear.
Install the 4x M10 screws. Tighten crosswise lightly. Then tighten the screws.