Detaching And Installing the Upper Oil Hose And Pipe

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Detach and push the upper oil hose away from the oil cooler.

Fig 1: Cutting Pipe

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the cut oil hose and pipe on the oil cooler.

Filling with oil

Fill the plastic container with 2 liters of oil.

NOTE: Only approved automatic transmission fluid may be used.

Fig 2: Plastic Container Hanging Under Hood

Courtesy of VOLVO CARS OF NORTH AMERICA.

Connect the hose from the plastic container to the cut oil pipe. Hang the plastic container under the hood.

Raise the car.