WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Gear-Shift Position Sensor
Courtesy of VOLVO CARS OF NORTH AMERICA.
Install the cable duct on the screw. Tighten to 25 Nm
.
Install the lever on the control shaft. Tighten to 16 Nm
.