Engine Management Systems Fenix and Motronic
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
To connect the breakout box to the Fenix and Motronic control systems which have 43+43-pin connectors (A+B):
Use two breakout boxes (A and B) with adapter 9511351 . The adapter is fitted with two connectors marked A and B.
Connector A (engine side) uses measurement terminals 1-43 on the breakout box A which correspond to #A1-#A43 on the control module.
Connector B (car side) uses measurement terminals 1-43 on the breakout box B which correspond to #B1-#B43 on the control module.