Control system AW, Engine Management System, LH and EZK
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
To connect the breakout box to AW, LH and EZK control systems with 30+30-pin (A+B) connectors:
Connector A (engine side) uses measuring terminals 1-30 which correspond to #A1-#A30 on the control module.
Connector B (car side) uses measuring terminals 31-60 which correspond to #B1-#B30 on the control module.
To connect the breakout box use adapter 9813195 .