Removing the screws from the sub-frame support plates (both sides)
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Preparations for removal of the stub axle
- position mobile jack 9985972 (applied lightly) under the right-hand side of the sub-frame
- slacken off both the sub-frame screws completely. Screw the screws back in approximately 5 turns
- release the sub-frame so that it rests on the screws and the mobile jack.