Removing stub axle from the control arm

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Prying Control Arm Down Using Lever 999 7076

Courtesy of VOLVO CARS OF NORTH AMERICA.

Pry the control arm down. Use a lever 9997076 . At the same time, lift the stub axle off the control arm.

NOTE: Install socket 9995562 on the stub axle ball joint. Do not damage the rubber bellows for the ball joint.