Lowering the sub-frame

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sub-Frame Screws And Mobile Jack

Courtesy of VOLVO CARS OF NORTH AMERICA.

Position the mobile jack lightly applied under the left side of the sub-frame. Remove the sub-frame screws.

Lower the sub-frame.

NOTE: When lowering ensure that the screws for the steering gear release from the sub-frame. Ensure that the ball joint pinion releases from the control arm. Remove the mobile jack and let the frame hang loose.