Removing the gearbox mounting screws
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Remove the bracket with the connectors for the heated oxygen sensors (HO2S) and the clamp for the cable harness from the gearbox.
Remove:
- the screws for the clamp securing the cable harness at the rear edge of the engine
- the nut, 1, for the bracket to the cable harness and the coolant hose
- the bracket for the air cleaner (ACL) (only applies to B5254T4)
- the 3 screws for the gearbox and engine and the 2 screws for the starter motor.
Tie up the cable harness.