Checking and transferring components on the transmission
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Check that the transmission mating surfaces are absolutely clean.
Lubricate the holes in the transmission (for the guide pins) and the hole for the guide pin for the starter motor. Use a little grease.
If the transmission is new, transfer the collision protection system to the new transmission.