Installing and tightening the screws for the gearbox

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Transmission And Engine Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the 7 x M10 screws for the transmission/engine.

First tighten alternately and crosswise to light contact.

At the same time, check that the whole of the gearbox is in contact with the engine.

Then install the screws to light contact. Tighten.

Remove the fixture from the gearbox.