Tightening the sub-frame screws (both sides)
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Tighten the screws on the left-hand side of the subframe first, followed by the right, as per Tightening torque .
Use angle gauge 9512050 .
Then tighten the 4 x M10 screws for the frame brackets.