Tighten the screw for the rear engine pad

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Lifting Anti-Roll Bar Mounting Using A Jimmy Bar

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lift the anti-roll bar a few mm. Use a jimmy bar. This makes it easier to insert the tool for the screw.

Tighten to 50 Nm .