Install the sub-frame on the bodywork

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Sub-Frame And Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE: Use 4 new M14 screws. Lubricate the screw threads.

NOTE: When the sub-frame is raised, ensure that the screws for the steering gear locate in the frame. Remove the hook/straps.

RHD cars: Also align the collision protection system which is positioned between the steering gear and frame.

Begin the installation of the subframe on the right-hand side.

Use the mobile jack to lift the frame toward the bodywork until the frame is approximately 10 cm from the bodywork.