Install the dip stick pipe and the ground lead on the transmission

WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Dipstick

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the screw with the ground lead and the dip stick pipe in the transmission.

Use a new rubber seal. Apply petroleum jelly to the rubber seal. Tighten to 25 Nm .

NOTE: Carefully check that the rubber seal is correctly positioned in the transmission. Failure to do so may result in leakage.